Seventeen towns.One Honest Radius.
Cabling is the one part of this work that cannot be done remotely — somebody has to be in the building with a ladder. So the service area is drawn around what we can actually reach and keep supporting, and every drive time on this page is measured from the shop in Bremen.
Same-day radius
Haralson and Carroll.Close enough to come back.
These are the towns where getting to you and back is an ordinary part of a working day. That matters more after the install than during it — the value of a local contractor shows up the first time something needs a hand on it.
Start a projectWaco, GA
Haralson County · US-78 — about 5 minutes from the shop.
Buchanan, GA
Haralson County seat · US-27 — about 10 minutes from the shop.
Mt. Zion, GA
Carroll County — about 15 minutes from the shop.
Tallapoosa, GA
Haralson County · US-78 · I-20 exit 5 — about 15 minutes from the shop.
Carrollton, GA
Carroll County seat · US-27 · I-20 exit 11 — about 20 minutes from the shop.
Carrollton networksVilla Rica, GA
Carroll & Douglas County · US-78 / I-20 · I-20 exit 24 — about 20 minutes from the shop.
Villa Rica networksBowdon, GA
Carroll County · GA-100 — about 25 minutes from the shop.
Regularly serving
Polk, Douglas, Paulding,Coweta, Cobb, Fayette.
Further out, and honest about it. These are jobs we plan around rather than drop in on, which mostly changes scheduling rather than the work. The number beside each town is the drive, not a promise about a particular morning.
All servicesRockmart, GA
Polk County — about 40 minutes from the shop.
Douglasville, GA
Douglas County seat · I-20 · I-20 exit 34 — about 35 minutes from the shop.
Douglasville networksHiram, GA
Paulding County · US-278 — about 45 minutes from the shop.
Powder Springs, GA
Cobb County · I-20 / US-278 — about 50 minutes from the shop.
Peachtree City, GA
Fayette County · GA-16 / GA-34 — about 70 minutes from the shop.
Three roads
The service area isReally just geography.
West Georgia is laid out along three roads, and so is the list above. Where a town sits on them is most of what decides whether we can support it properly.
I-20.Exit 11 is ours.
The interstate that runs past Bremen is officially the Tom Murphy Freeway, named for a Bremen native who served as Speaker of the Georgia House from 1973 to 2002. It is a genuinely useful road for a company that has to be somewhere with a ladder.
- Exit 5 — Tallapoosa and Bowdon
- Exit 11 — Bremen and Carrollton, on US-27
- Exit 19 — Temple
- Exit 24 — Villa Rica and Dallas
- Exit 34 — Douglasville
US-27.State Route 1.
The Martha Berry Highway, and the state’s first numbered route. It runs Carrollton to the south of us and Buchanan and Cedartown to the north, which is most of the same-day radius on one road.
- South — Carrollton, about 20 minutes
- North — Buchanan, about 10 minutes
- North — Cedartown, about 30 minutes
- The route most of our Carroll County work runs on
US-78.Still quicker.
For the towns immediately around Bremen the old highway beats the interstate, because getting on and off I-20 costs more time than it saves. Waco is closer to our shop than most people’s commute to work.
- Waco — about 5 minutes
- Temple — about 10 minutes
- Tallapoosa — about 15 minutes
- Villa Rica — about 20 minutes
Why the radius is real
Anybody can listFifty cities on a page.
Coverage claims are the cheapest thing on any contractor’s website. What is expensive is turning up. These are the three places that difference shows.
01
The assessment
Walking a building costs us a morning. Inside the radius that is a normal cost of doing business, which is why the assessment is free and not a sales gate.
02
The install itself
Cable, terminations, racks and access points are hands-on work. Nobody has ever pulled a Cat6 run over a video call.
03
The year after
Most of what a system needs is remote — firmware, configuration, a look at the health page. But the day it is not, distance is the whole story.
04
Knowing the buildings
Block walls, metal roofs, older construction and detached shops behave in particular ways. Working the same counties repeatedly is how that stops being a surprise.
Our lane
The towns above, and the counties they sit in — Haralson, Carroll, Polk, Douglas, Paulding, Coweta, Cobb and Fayette. Homes, churches and small business inside that area.
Not our lane
Anywhere we could not get back to on a bad day. If you are outside the area and the project is a good fit, we will say so — and if it is not, we will tell you that instead of quoting it.
Common questions
Distance,Answered plainly.
The questions that actually come up about where we work and what being further out changes.
Call (770) 828-5748Do you charge a trip fee for the towns further out?
Travel is part of how any job gets priced, and a job in Peachtree City carries more of it than a job in Waco. It is quoted up front with everything else, after the free assessment, so there is no separate surprise line on the invoice.
Will you work outside the towns listed here?
Often, yes — the list is where we work regularly, not a fence. If you are past the edge of it, call and ask. We would rather tell you plainly that you are too far for us to support properly than take the install and be four hours away when something goes wrong.
What does the same-day radius actually mean?
It means Haralson and Carroll County are close enough that getting to you and back is a normal part of a working day rather than a trip that has to be planned around. It is not a guaranteed response time, and we will not print one we cannot keep.
Do you have an office we can visit?
No. CDM is a service-area business working out of Bremen, GA 30110 — the work happens in your building, not ours. The free assessment is us coming to you.
Do you serve the Alabama side of the line?
Tallapoosa is fifteen minutes from our shop and the state line is a few minutes past it, so eastern Alabama is a reasonable question rather than a strange one. Call and describe the property, and we will give you a straight answer about whether we can support it properly.
No cost, no obligation
Start with aFree network assessment.
Tell us where the building is and what it is doing wrong. We walk it, look at what is actually installed, and tell you plainly what is fine, what is a problem, and what it would take to fix. You get the findings whether or not you hire us.
Typical response — same business day